Renews.
← IT

STM32MP2 Development: M33 Blinky Firmware Success

A developer successfully ran blinky firmware on the STM32MP2's M33 core using upstream tools.

IT·1 source
Photo: christoph1703 / Pixabay

An author began writing about an STM32MP2 experiment in December 2025, noting they had to remain quiet about a security bug until ST released an advisory. The project aimed to build firmware entirely with upstream aarch64 tools without vendor SDKs. The goal was to run code on the dual Cortex-A35 processor and the M33 auxiliary core without using external DDR memory.

The author purchased an STM32MP257F-EV1 development board for the experiment. They chose the M33-TD boot mode to stage the bring-up without initially working with a bare metal Cortex-A. The RISAB SECCFGR register settings were configured to enable secure domain code access to SRAM1/2 and VDERAM. The A35 FSBL image was loaded to the boot/secure SYSRAM alias at address 0x0e00_0000.

The author successfully got a simple LED blinky firmware running on the Cortex-M33 auxiliary core. A tool was created to boot the blinky firmware from flash instead of loading it over JTAG. The STM32MP2 features a 5 Gbps SERDES with a PIPE interface, which can be configured as PCIe gen1/2 x1 or USB 3.

Sources

Every sentence of this story was checked against facts quoted from these articles. How we make the news

Spotted an error? Tell us

Sign in

Keep the stories you like in your favorites.

Forgot your password?

No account?